Table Bar Top Clear Epoxy Resin - ProGlas 1000- 1 Gallon Kit

ProGlas 1000 Clear Coat - 1 Gallon Kit is a crystal clear table top epoxy resin formulated for many purposes with an easy 1:1 mix ratio application. Perfect for obtaining a tough, glossy finish on table tops, bar tops, river tables, live edge tables, countertops, or any other surfaces that you can imagine. This clear resin epoxy has a self-leveling system that allows an easy application and produces a tough, scratch-resistant, and water-resistant coating. The formula also has UV inhibitors for increased UV resistance. The ProGlas 1000 Clear Coat is an extremely clear, high gloss epoxy coating formulated to produce a deep glass appearance, making it perfect for a variety of professional and home projects like crafts, jewelry making, and marine applications. Mix the resin with color pigments or glitter, make art resin projects, dominos, keychains, or anything you can think of! This formula has an extended “open time” that allows up to 55 minutes of work-life at 70°F. It contains 100% Solids, NO VOC’s (Volatile Organic Compounds) that can be harmful to human health. Properties 55 Minute Gel Time or Working Time 3500 cps Part A 1400 cps Part B Tensile Strength, psi: 3390 Tensile Modulus: 261.500 Flexural Strength, psi: 6752 Flexural Modulus: 197,848

• Premium Grade Crystal Clear Epoxy - Table tops, bars, wood finishes, river tables, live-edge tables, countertops, or any other remodeling or DIY projects you can think of.
• Easy to Use for First-time Users or Professionals - 1:1 Mixture, Self-leveling resin for easy application, producing a tough, high gloss finish without wasting your time or money. Your projects will turn out amazing!
• High-Quality Versatility - The ProGlas 1000 Clear Coat is an extremely clear, high gloss epoxy coating formulated to produce a deep glass appearance. It has UV inhibitors for higher resistance! Scratch and water-resistant coating. 100% Solids and No VOCs (Volatile Organic Compounds) that can be harmful to human health.
• Extended open time - Allows a working time of up to 50 minutes in the mixing container at 70°F and up to one hour working time on the surface being coated. Not recommended in freezing climates due to the possibility of de-lamination.
• Eliminating Air Bubbles - Once the flood coat has settled into place, take a torch or heat gun and wave the tool 6 to 8 inches above the surface. The bubbles will instantly start to pop. Repeat the process until all bubbles are gone.